Have you ever tried to bake a cake, only to find the oven stays cold? It is very frustrating. You mix the batter and put the pan inside, but nothing happens. Your plan is ruined. An oven that will not heat up is a big problem. You need it to cook food for your family. Do not panic. Often, the fix is simple. You can even check a few things yourself before calling for help.
At Dremus Appliance Repair, we will help you understand what is going wrong. We work on gas and electric appliances and help with many common oven problems.
Below, we’ll look at the most common reasons your oven isn’t heating properly, along with how to fix them and get your oven working again.
Common Causes of a Cold Oven and Solutions
The Bake Element Might Be Broken
If you have an electric oven, look at the bottom floor inside it. You will see a dark metal wire resting there. This wire is called the bake element.
When you turn the oven on, this wire should get very hot. It should glow a bright orange or red color.
Sometimes, the bake element gets old from being used so much to cook meals. It can burn out over time. You might see a small hole or a dark spot on it.
If you see a broken spot, the wire cannot get hot anymore. The heat cannot flow through the broken part. This means your oven will stay completely cold.
The solution is to replace the bake element. A good repair expert can take out the old wire and put a new one in quickly. Then your oven will get hot again.
A Bad Igniter in Gas Ovens
Gas ovens are very popular, but they have different parts than electric ovens. If you have a gas oven, the problem might be the igniter. It opens the valve to let the gas flow into the oven. Then, it makes a hot spark to light the gas on fire.
If your gas oven is not getting hot, the igniter might be weak. As an igniter gets older, it takes a longer time to get hot. If it does not get hot enough, the gas valve will stay closed tight. No gas means no fire.
You can hear a clicking sound if the igniter is trying to work. If it clicks but there is no heat, the igniter is probably bad. You will need a new igniter. An expert can install a new one for you.
The Temperature Sensor Is Not Working
Every oven needs to know how hot it is inside. There is a small metal part called a temperature sensor. It sits inside the oven near the top back corner. This sensor tells the oven’s computer brain how much heat is inside.
If the sensor is broken, it might send the wrong message. It might tell the oven that it is already very hot inside. Then the oven will stop making more heat and shut off. Your food will just sit in a cold box.
Sometimes, the sensor gets bumped by a big pan. Make sure it is not touching the wall. If it is broken, an expert can test it easily. If it is bad, they will put a new one in.
The Thermal Fuse Is Blown
Your oven has a smart safety part inside called a thermal fuse. It stops the oven from getting too hot and starting a fire. If the oven gets hotter than it should, the fuse will blow.
When the thermal fuse blows, the oven shuts off completely. It will not heat up at all. This happens to keep your house safe from danger. A blown fuse cannot be fixed. A brand-new fuse must be put in its place by a helper.
The Control Board Is Confused
The control board is like the main brain of your oven. It tells all the other parts what they need to do. It tells the bake element to get hot. It tells the igniter to light the fire.
Sometimes, the control board breaks down. A part on the board might burn out. If the brain is broken, the oven will not know how to heat up. Replacing a board is a big job. It is best to have a professional look at it to make sure it is done right.
Why You Should Call an Oven Repair Technician
You might think about fixing these broken parts by yourself. But ovens can be dangerous machines. They use strong electricity and natural gas. If you make a mistake, you could get hurt. You could also make the oven even worse.
It is always a smart choice to call a trained helper. They know how to handle wires and gas pipes safely. They find the real problem fast. This saves you time and worry.
If you live in Maryland, Dremus Appliance Repair is ready to help you with your broken oven. We have been fixing appliances for over ten years. We know all about ovens, refrigerators, washers and dryers. We repair major brands like LG, KitchenAid and Frigidaire.
We know your time is important. You do not want to wait days for a repair. When you call us, we try to fix your oven on the same day. We take pride in our fast work. We take great care of our clients to make sure you get the best service.
We want you to feel safe and happy with our work. That is why we give you a ninety-day warranty guaranteed for parts and labor. We want to make sure our service is affordable. If the same problem comes back, we will fix it.
Our friendly team visits many local areas. We go to Severn, Odenton, Fort Meade, Hanover, Glen Burnie, Gambrills, Crofton, Laurel, Fulton, Elkridge, Ellicott City, Jessup, Bowie, Lanham and Annapolis. We are the leading experts near your home.
Get Your Oven Working Again
A cold or weak oven can make cooking hard. But the problem may be simple.
A bad element, igniter, sensor, thermostat, fan, door, or control board can affect oven heat.
If your oven is not heating right, do not guess which part is bad. The best step is to have the oven checked by a trained repair technician.
For oven and appliance repair service, contact us to learn more about available repair services.
FAQs
Can I fix my oven by myself?
You can do simple checks, such as checking the breaker box or looking at the door seal. Do not touch any wires or gas parts. It’s safer to let a professional do the work.
Will I have to wait a long time for an oven repair?
No, you won’t have to wait long. Dremus Appliance Repair offers same-day service to get you back to cooking fast.