Electric cooktops have been known to turn off during cooking, which makes for a very frustrating experience. When this happens, your pan gets cold, your food stays on the burner and everyone goes hungry. Luckily, many of these sudden shutdowns can be attributed to quick fixes that can be made in as little as 5–10 minutes. In this article, we will talk about why electric cooktops shut off too soon, how you can solve the issue on your own and when you should call a technician.
Quick Reasons Your Electric Cooktop Turns Off
- A safety feature built into the product that prevents the burner from getting too hot.
- Touch controls that can be confused by water or spills.
- A faulty electrical circuit or a loose electrical connection.
- A worn-out burner element or a weak heat switch.
- A damaged glass cooktop, or an incorrectly positioned pan on the burner.
The Overheat Safety Feature Kicked In
The electric stovetop uses a device referred to as a “limiter” to control the temperature of each burner. Once a burner gets too hot, the limiter will reduce power to the burner for a while and when it cools down, it will turn the power back on. Three factors may increase how quickly the limiter reacts: whether there is anything inside the pot or pan, the shape of the bottom of the pan and the size of the pan. A strong clue that the overheat limiter is being triggered is if the burner shuts off on “high” but works on “medium.”
Try these steps:
- Shut off the burners and let them cool for approximately 10 minutes.
- Be sure to use a flat pan of the proper size for the burner.
- Lower the setting and see if the shutoffs stop.
Auto Shut-Off Timers and Child Locks
Newer cooktops are designed to turn off the heating element after several hours of operation at the same temperature. Also, some newer cooktops may lock the controls if the user touches the panel by mistake. To determine the maximum amount of time your cooktop can operate before automatically turning off and to learn how to unlock the controls, consult the owner’s manual.
Spills and Wet Fingers on Touch Controls
Touch-controlled cooktops may react unpredictably when exposed to moisture, cooking fats, or boiling liquids near the touch control buttons. When this occurs, the cooktop will either beep, flash, or shut down in order to protect itself from potential damage. Use a soft cloth to dry the cooktop. Remove any damp towels or pot lids from the touch controls.
A Tripped Breaker or Loose Power Connection
Electric cooktops have high energy demands and when a breaker fails or there are loose connections in the wiring system, the cooktop will completely shut down.
- Look at your circuit breaker panel to see if one of the switches does not line up with the rest.
- Flip it fully off and then back on.
- If this occurs again, stop and seek assistance from a professional. This can create a safety hazard.
Another potential reason for the heat going on and off may be a loose connection at the terminal located beneath the cooktop. Tightening that connection requires working near live wiring, so this should only be performed by a professional technician.
Worn Burner Elements and Failing Switches
Burner elements are subject to wear and tear over time and you may find that a coil has cracked or has a burned spot. Additionally, the infinite switch, located just behind the control knob used to adjust the heat level, can become less effective. Pay attention to the following indicators:
- A burner that works on some settings but not others
- A burner that heats up and then quits after a few minutes
- Knobs that feel loose or no longer click the way they used to
To find out if the element itself is the problem, try swapping it with another functioning coil on your cooktop. If the issue occurs with the new element, then the problem lies with the original element. However, if the issue continues to occur in the same location after replacing the element, then the problem is more than likely due to either the switch or the socket.
Cracked Glass and Pan Problems
A crack in the glass top may affect how accurately the sensor determines the temperature of the burner. In addition, there are safety concerns about continuing to use the burner. Until a professional examines it, discontinue its use. Additionally, ensure your pan lays flat on the surface; otherwise, a warped pan may cause the sensor to read an incorrect temperature.
Which Clue Matches Your Problem?
- One burner shuts off: the element, the switch, or the limiter.
- All burners turn off at the same time: this may be due to a tripped circuit breaker, no power to the unit, or a faulty control board.
- Shutoff only on high heat: the overheat limit or a pan issue.
- Beeping or flashing lights first: the touch panel or an error code.
Safe Things You Can Do at Home
- Turn off the power at the breaker before touching anything near the cooktop.
- Clean the surface and the control area.
- Test the burner with a different pan.
- Write down the number of the burner that was on, the level of heat used and how many minutes the burner ran until it stopped.
Taking the time to write that last note makes it easier for technicians to determine why an issue has occurred. It is worth your time to do so.
When to Call a Professional
If you think there’s a problem with your cooktop, call us right away. This is especially important if you smell something burning, see sparks, notice melted wires, or if the circuit breaker trips every time you try to use your cooktop. Your cooktop is one of the highest-powered appliances in your household. Therefore, if you attempt to “guess” what may be wrong with your cooktop, you may be putting your home in danger. If your cooktop is more than 13 years old and many burners are having problems, it is smart to check the repair costs of your old cooktop against the price of a new one.
How Dremus Appliance Repair Can Help
Dremus Appliance Repair is a locally owned company that provides residential and commercial appliance repair services throughout the state of Maryland. We provide reliable and professional service for appliances including cooktops, ranges, ovens and stoves. Our team has over ten years of experience in providing quality appliance repair services. Dremus Appliance Repair serves several communities in Maryland, such as Severn, Odenton, Glen Burnie, Crofton, Annapolis and Bowie. We also service a wide range of brands, including GE, Whirlpool, Samsung, Frigidaire, Bosch and KitchenAid. Dremus Appliance Repair is known for providing fair prices, honest estimates and no hidden fees.
Learn more about your cooktop on our repair page. Or give us a call at 443-538-5142 for service in Howard and Anne Arundel Counties. If you are located in PG or Montgomery County, call 240-476-9056. Or, if you would prefer to schedule your appointment online, please do so.
Final Thoughts
A cooktop will often shut off during cooking if it is protecting itself or if there is a problem with a component. While you can identify patterns and do basic troubleshooting yourself, you should always call a professional to handle the electrical components.
FAQs
Q. Why does the stove turn off when it is hot?
It has a safety part inside. This part turns the heat off so it does not get too hot. It turns back on when it cools down.
Q. Can a wet spill turn off the stove?
Yes. Touch buttons get mixed up by water. Dry the stove with a soft cloth to fix this.
Q. What if all the heat turns off at once?
The power might be out. Check the main power box. A switch might be off. Flip the switch fully off and back on.
Q. Why does just one burner stop working?
That one burner might be broken. The heat switch could be old and worn out. A pro can put in a new one.

No comment